Wireless Display Storage Module
Classification：
SenseDisc
Product Model：
SD1000
Grade：
Function Description：
The wireless display module is small in size, easy to use, and has stable transmission. It can collect experimental data in real time during the experiment.
Share products:
1. Single-channel Lightning input with 12-bit resolution for connecting to SenseDisc sensors.
2. Display: 1.3-inch OLED screen with a resolution of 128*64, directly displays measurement data.
3. Built-in 1800mAh battery, supports independent measurement and data storage without a computer or other terminal.
4. Can store 50 sets of 2000 points of data.
5. Two indicator lights indicate Bluetooth operating status and device battery status.
6. Transmission method: Wireless Bluetooth 2.0/4.0 connection to a terminal or direct USB connection to a computer for data transmission.
7. The product can be powered directly by USB or two AA batteries.
Related Products
Motion Transmitter and Receiver Sensor
Motion transmitter and receiver sensor is divided into two parts (transmitter and receiver); the working principle is: in a very short period of time can be considered as light transmission time is 0, the transmitter first transmit infrared light signals to inform the receiver to transmit ultrasonic signals at the beginning of the moment and transmit ultrasonic waves; Receiver receives the light signals to record the beginning of the moment and timing until the ultrasonic signals are received , finally according to the distance = speed of sound × time to calculate the distance between the generator and the receiver. The receiver receives the light signal and records the starting moment and times it until it receives the ultrasonic signal and then stops timing to calculate the ultrasonic propagation time. The transmitter circuit of the motion transmitter and receiver sensor first provides a narrow voltage pulse to the piezoelectric sensor, under the action of this pulse, the piezoelectric wafer begins to oscillate and emit ultrasonic pulses outward, and at the same time the transmitter uses a light source to inform the receiver to start timing, and when the receiver receives the pulse, the time (T) used by the transmitter from the emission of the pulse until the receiver receives it is also calculated. There is a screw hole (M6 thread) on the side of the sensor, which can be used to fix the sensor to a suitable device.
1. Used to measure current in a circuit. 2. Features a three-range selector switch, allowing you to switch measurement ranges with a single click according to experimental requirements.
1. Used to measure voltage across circuits and electrical devices. 2. Features a three-range selector switch, allowing you to switch measurement ranges with a single click according to experimental requirements.
7F, No.1 Building, Tianan Cyber Park, No.36 Yongfeng Road, Qinhuai District, Nanjing, China. (R&D centre)
No.306 Wenchang Road, Yongyang Street, Lishui Disctric, Nanjing, China. (Manufacturing base)
©COPYRIGHT 2023 Jiangsu SWR Science & Technology Co.,Ltd. ALL RIGHTS RESERVED | SEO