Apparatus for Determining Oxygen Content in Air
Classification：
Chemistry
Product Model：
TP6056
Grade：
Junior high school
Function Description：
Used for measuring oxygen content in air.
Share products:
Configuration:
High voltage power supply, reaction generating device (base, gas cylinder, burning spoon, hole plug, beaker), power cable, banana plug to alligator clip wire
Functions & Applications:
1. Used for measuring oxygen content in air. It can not only observe the burning of red phosphorus, but also monitor the change of oxygen content and pressure in the bottle during the burning of red phosphorus.
2. The use of high-voltage power supply to generate electric spark ignition, the experiment process does not directly contact the burning red phosphorus, effectively reduce the harm of the combustion and its products to the human body, and the experimental safety is high.
3. The whole process of reaction and detection is closed, which effectively reduces the error caused by internal air expansion and leakage caused by heat after red phosphorus combustion and then put into the gas collection cylinder, and the experimental data is more accurate.
4. There is a sensor hole on the gas cylinder, which has good adaptability, and can be used with the oxygen sensor and absolute pressure sensor to display the oxygen content and the pressure change process in the bottle, and real-time data can be presented on Windows, Android, and iOS system terminals.
5. Equipped with special experimental software, preset template. Automatically record data changes in the form of tables and curves, the experimental results are more intuitive and obvious.
Szie: 200mm*100mm*135mm
Weight: 1.223kg
Related Products
Motion Transmitter and Receiver Sensor
Motion transmitter and receiver sensor is divided into two parts (transmitter and receiver); the working principle is: in a very short period of time can be considered as light transmission time is 0, the transmitter first transmit infrared light signals to inform the receiver to transmit ultrasonic signals at the beginning of the moment and transmit ultrasonic waves; Receiver receives the light signals to record the beginning of the moment and timing until the ultrasonic signals are received , finally according to the distance = speed of sound × time to calculate the distance between the generator and the receiver. The receiver receives the light signal and records the starting moment and times it until it receives the ultrasonic signal and then stops timing to calculate the ultrasonic propagation time. The transmitter circuit of the motion transmitter and receiver sensor first provides a narrow voltage pulse to the piezoelectric sensor, under the action of this pulse, the piezoelectric wafer begins to oscillate and emit ultrasonic pulses outward, and at the same time the transmitter uses a light source to inform the receiver to start timing, and when the receiver receives the pulse, the time (T) used by the transmitter from the emission of the pulse until the receiver receives it is also calculated. There is a screw hole (M6 thread) on the side of the sensor, which can be used to fix the sensor to a suitable device.
1. Used to measure current in a circuit. 2. Features a three-range selector switch, allowing you to switch measurement ranges with a single click according to experimental requirements.
1. Used to measure voltage across circuits and electrical devices. 2. Features a three-range selector switch, allowing you to switch measurement ranges with a single click according to experimental requirements.
7F, No.1 Building, Tianan Cyber Park, No.36 Yongfeng Road, Qinhuai District, Nanjing, China. (R&D centre)
No.306 Wenchang Road, Yongyang Street, Lishui Disctric, Nanjing, China. (Manufacturing base)
©COPYRIGHT 2023 Jiangsu SWR Science & Technology Co.,Ltd. ALL RIGHTS RESERVED | SEO