Velocity of Trolley Motion
Classification：
Physics
Product Model：
TP4017
Grade：
Primary shcool
Function Description：
Used to compare the speed of object movement experiments, explore the relationship between the speed of trolley movement and factors such as tension, friction surface, trolley mass, and the number of trolley wheels.
Share products:
Composition
Trolley guide rail profile (consisting of 800mm scale, guide rail fixing clamp, photoelectric gate fixing bracket, spring buffer device, end fixed pulley), experimental trolley, plastic sprayed smooth surface guide rail, velvet friction surface guide rail, weight
Function
1. Used to compare the speed of object movement experiments, explore the relationship between the speed of trolley movement and factors such as tension, friction surface, trolley mass, and the number of trolley wheels.
2. With the photoelectric gate sensor, the movement speed of the trolley can be measured, and the data can be presented in real time on Windows, Android, and iOS system terminals.
3. The trolley weight fixing rod can fix multiple weights of different masses at the same time, and can be matched with more than 10 combinations of different trolley masses without affecting the normal operation of the photoelectric gate, and explore the impact of different masses on the movement of the trolley.
4. The pull rod at the tail of the trolley can complete the switch between 4 wheels and 6 wheels in one step without changing the mass of the trolley, and explore the impact of different numbers of wheels on the movement of the trolley.
5. Adding weights of different masses to the weight barrel can provide more than 10 different pulling forces to explore the impact of different pulling forces on movement.
6. The friction between the pulley and the wheel axle is extremely small, which can effectively reduce the impact of axle friction on the experiment.
7. The blade-type wheel design has low friction with the track.
8. There is a spring shock absorber between the wheel and the car body to effectively protect the wheels of the trolley.
9. The guide rail fixing clamp can quickly fix or replace the track.
10. The guide rail profile comes with an 800mm scale, the photoelectric gate bracket can be moved freely and there is a red arrow mark on the side, which can clearly indicate the movement distance of the trolley.
11. Equipped with special experimental software, preset templates, automatic recording of single measurements, automatic calculation of average values for multiple measurements, and automatic recording of data changes in a table form, the experimental results are more intuitive and obvious.
Experiments
Experiments on the speed of the trolley movement, the average speed of the measured object, etc.
Related Products
The Micro-Voltage Sensor is used to measure voltage within -60mV to 60mV. It amplifies the input voltage in order to measure voltage in micro level.
Milli-Current Sensor is used to measure the current within -20 to 20mA in circuit. When current passes through resistor, it will form a tiny electric potential difference at both ends of the resistor. After circuit amplifying, it can accurately measure the current in circuit.
Microphone collects sound signal using to electret microphone. The microphone consists of dust gauze, shell, vibrating diaphragm, spacer, back plate, copper ring, cavity and PCB. The microphone is formed to a capacitor with vibrating diaphragm, spacer and back plate. There are charge on the plastic vibrating diaphragm. Once it is affected by sound, the diaphragm starts vibrating so that distance between diaphragm and back plate changes. The difference Δd is generated. According to C=εS/4πkd, the capacitance will be changed by ΔC. According to C=Q/V (Q is electric charge quantity), due to the change of ΔC, Q is constant so that voltage will change by ΔV. The sound signal is transfer to electric signal. Sensor circuit transfer the electric signal into analog signal under standard range.
Used to measure the temperature of the surface of the object, gas, non-corrosive acid and alkali liquid.
7F, No.1 Building, Tianan Cyber Park, No.36 Yongfeng Road, Qinhuai District, Nanjing, China. (R&D centre)
No.306 Wenchang Road, Yongyang Street, Lishui Disctric, Nanjing, China. (Manufacturing base)
©COPYRIGHT 2023 Jiangsu SWR Science & Technology Co.,Ltd. ALL RIGHTS RESERVED | SEO