Intelligent Power Supply
Classification：
Physics
Product Model：
TP2094
Grade：
Junior high shcool
Function Description：
It can be used with various electrical experimental equipment to complete electromagnetic physics experiments such as electromagnetic induction phenomenon, current magnetic effect, the relationship between uniformly changing electric field and generated magnetic field, and electric resonance phenomenon.
Share products:
Composition
Power supply body (input voltage AC: 220V±10% 50Hz, output voltage DC: 1V~20V, rated current 1A, output frequency: 1Hz~10000Hz), power cord, alligator clip line
Function
1. It can be used with various electrical experimental equipment to complete electromagnetic physics experiments such as electromagnetic induction phenomenon, current magnetic effect, the relationship between uniformly changing electric field and generated magnetic field, and electric resonance phenomenon.
2. It can provide 5 different waveforms of power supply voltage, including direct current, sine wave, square wave, triangle wave, and trapezoidal wave, and the output voltage peak value can be continuously adjusted within 1V~20V.
3. Through the panel button, it can realize free switching between four states: trigger output 1 waveform, trigger output 2 waveforms, trigger output 3 waveforms, and continuous output.
4. The frequency of the output voltage can be adjusted by the frequency knob, and the peak value of the output voltage can be adjusted by the amplitude knob.
5. The rising edge slope and falling edge slope of the output voltage waveform can be changed by the slope adjustment device.
6. It has built-in overload protection function, which is displayed by the overcurrent indicator light. When the current in the circuit is too large, the power supply is automatically cut off to ensure the safety of the experiment.
Experiment
With other equipment, it can complete: measurement of power supply electromotive force and internal resistance, measurement of volt-ampere characteristics of small light bulbs, Ohm's law, series and parallel connection of resistors, electromagnetic induction phenomenon, induced current, series and parallel connection of capacitors and charging and discharging, exploration of the magnetic field generated by the toroidal coil with voltage change, exploration of Faraday electromagnetic induction (induced electromotive force), current magnetic effect, the relationship between uniformly changing electric field and generated magnetic field, electric resonance phenomenon and other electromagnetic physics experiments
Related Products
The Distance sensor consists of two parts: transmitter and receiver; The working principle is that the propagation speed of light is much faster than that of sound waves. Therefore,it can be assumed that the propagation time of light is 0. The transmitter sends an infrared light signal to inform the receiver the beginning time of ultrasonic wave and sends the ultrasonic wave, the receiver receives the light signal and start to record the beginning time and counts until it receives the ultrasonic signal ,so as to calculate the time used for ultrasonic propagation. Finally, according to the formula “distance=speed × time ”to calculate the distance between transmitter and receiver. There is a screw hole (M6 thread) on the side of the Distance sensor, which can be used to fix the sensor on a suitable device.
It is used to measure the pressure difference between the gas in the atmospheric environment and the measured space.
Used to measure the object through the photoelectric gate light blocking time and speed, acceleration, momentum, kinetic energy and other physical quantities.
7F, No.1 Building, Tianan Cyber Park, No.36 Yongfeng Road, Qinhuai District, Nanjing, China. (R&D centre)
No.306 Wenchang Road, Yongyang Street, Lishui Disctric, Nanjing, China. (Manufacturing base)
©COPYRIGHT 2023 Jiangsu SWR Science & Technology Co.,Ltd. ALL RIGHTS RESERVED | SEO