Intelligent Power Supply
Classification：
Physics
Product Model：
TP2094
Grade：
Junior high shcool
Function Description：
It can be used with various electrical experimental equipment to complete electromagnetic physics experiments such as electromagnetic induction phenomenon, current magnetic effect, the relationship between uniformly changing electric field and generated magnetic field, and electric resonance phenomenon.
Share products:
Composition
Power supply body (input voltage AC: 220V±10% 50Hz, output voltage DC: 1V~20V, rated current 1A, output frequency: 1Hz~10000Hz), power cord, alligator clip line
Function
1. It can be used with various electrical experimental equipment to complete electromagnetic physics experiments such as electromagnetic induction phenomenon, current magnetic effect, the relationship between uniformly changing electric field and generated magnetic field, and electric resonance phenomenon.
2. It can provide 5 different waveforms of power supply voltage, including direct current, sine wave, square wave, triangle wave, and trapezoidal wave, and the output voltage peak value can be continuously adjusted within 1V~20V.
3. Through the panel button, it can realize free switching between four states: trigger output 1 waveform, trigger output 2 waveforms, trigger output 3 waveforms, and continuous output.
4. The frequency of the output voltage can be adjusted by the frequency knob, and the peak value of the output voltage can be adjusted by the amplitude knob.
5. The rising edge slope and falling edge slope of the output voltage waveform can be changed by the slope adjustment device.
6. It has built-in overload protection function, which is displayed by the overcurrent indicator light. When the current in the circuit is too large, the power supply is automatically cut off to ensure the safety of the experiment.
Experiment
With other equipment, it can complete: measurement of power supply electromotive force and internal resistance, measurement of volt-ampere characteristics of small light bulbs, Ohm's law, series and parallel connection of resistors, electromagnetic induction phenomenon, induced current, series and parallel connection of capacitors and charging and discharging, exploration of the magnetic field generated by the toroidal coil with voltage change, exploration of Faraday electromagnetic induction (induced electromotive force), current magnetic effect, the relationship between uniformly changing electric field and generated magnetic field, electric resonance phenomenon and other electromagnetic physics experiments
Related Products
UV Sensor is used to detect UV light. The wavelength of UV light in electromagnetic spectrum is in the range of 100nm—400nm. The sensor is able to convert the UV light to voltage signal which is direct proportional to the strength of UV light.
Frequency sensors are used to measure the frequency of an alternating current (waveform). It can be adapted to a wide range of scenarios. The AC voltage signal is converted to a standard TTL square wave by an internal high resistance buffer and a high-speed gate circuit, and counted by an internal timer counter to convert the frequency.
Sound Level Sensor can measure the intensity of sound. It collects sound signal using electret microphone. After amplified by circuit, it can output maximum sound intensity value.
7F, No.1 Building, Tianan Cyber Park, No.36 Yongfeng Road, Qinhuai District, Nanjing, China. (R&D centre)
No.306 Wenchang Road, Yongyang Street, Lishui Disctric, Nanjing, China. (Manufacturing base)
©COPYRIGHT 2023 Jiangsu SWR Science & Technology Co.,Ltd. ALL RIGHTS RESERVED | SEO