Apparatus for Work Done by Friction
Classification：
Physics
Product Model：
TP2011
Grade：
Junior high school
Function Description：
Used for experiments on temperature increase by friction work.
Share products:
Composition
Copper tube, table clamp, special hole plug for temperature sensor, friction cotton rope
Function
1. Used for experiments on temperature increase by friction work.
2. Pull the cotton rope to rub the copper tube, and use the temperature sensor to measure the temperature of the air in the copper tube, and present the data in real time on Windows, Android, and iOS system terminals.
3. Equipped with special experimental software, preset templates, automatically record data changes in the form of tables and curves, and the experimental results are more intuitive and obvious.
Experiment
Explore experiments such as friction heat generation and conversion of mechanical energy into internal energy
Related Products
Motion Transmitter and Receiver Sensor
Motion transmitter and receiver sensor is divided into two parts (transmitter and receiver); the working principle is: in a very short period of time can be considered as light transmission time is 0, the transmitter first transmit infrared light signals to inform the receiver to transmit ultrasonic signals at the beginning of the moment and transmit ultrasonic waves; Receiver receives the light signals to record the beginning of the moment and timing until the ultrasonic signals are received , finally according to the distance = speed of sound × time to calculate the distance between the generator and the receiver. The receiver receives the light signal and records the starting moment and times it until it receives the ultrasonic signal and then stops timing to calculate the ultrasonic propagation time. The transmitter circuit of the motion transmitter and receiver sensor first provides a narrow voltage pulse to the piezoelectric sensor, under the action of this pulse, the piezoelectric wafer begins to oscillate and emit ultrasonic pulses outward, and at the same time the transmitter uses a light source to inform the receiver to start timing, and when the receiver receives the pulse, the time (T) used by the transmitter from the emission of the pulse until the receiver receives it is also calculated. There is a screw hole (M6 thread) on the side of the sensor, which can be used to fix the sensor to a suitable device.
1. Used to measure current in a circuit. 2. Features a three-range selector switch, allowing you to switch measurement ranges with a single click according to experimental requirements.
1. Used to measure voltage across circuits and electrical devices. 2. Features a three-range selector switch, allowing you to switch measurement ranges with a single click according to experimental requirements.
7F, No.1 Building, Tianan Cyber Park, No.36 Yongfeng Road, Qinhuai District, Nanjing, China. (R&D centre)
No.306 Wenchang Road, Yongyang Street, Lishui Disctric, Nanjing, China. (Manufacturing base)
©COPYRIGHT 2023 Jiangsu SWR Science & Technology Co.,Ltd. ALL RIGHTS RESERVED | SEO