Normal Open
Classification：
RJ45 Sensor
Product Model：
TS2115
Grade：
Function Description：
The normally open controller is an electronic switch, generally used with sensors in automatic control circuits.
Share products:
Structure:
The name, model and range are on the front of the controller, the front is an alligator clip wire, and the back is a standard network interface.
Function:
The normally open controller is an electronic switch, generally used with sensors in automatic control circuits. The normally open controller is disconnected in the normal state, and can be triggered by a certain condition to become closed, which can connect the circuit and realize automatic control.
Standard network interface, the connection socket has directional and self-locking functions, which can prevent the sensor from falling off to ensure stable and reliable data transmission, and support hot plugging.
Specifications:
Rated voltage: 30V
Rated current: 1A
Related Products
Motion Transmitter and Receiver Sensor
Motion transmitter and receiver sensor is divided into two parts (transmitter and receiver); the working principle is: in a very short period of time can be considered as light transmission time is 0, the transmitter first transmit infrared light signals to inform the receiver to transmit ultrasonic signals at the beginning of the moment and transmit ultrasonic waves; Receiver receives the light signals to record the beginning of the moment and timing until the ultrasonic signals are received , finally according to the distance = speed of sound × time to calculate the distance between the generator and the receiver. The receiver receives the light signal and records the starting moment and times it until it receives the ultrasonic signal and then stops timing to calculate the ultrasonic propagation time. The transmitter circuit of the motion transmitter and receiver sensor first provides a narrow voltage pulse to the piezoelectric sensor, under the action of this pulse, the piezoelectric wafer begins to oscillate and emit ultrasonic pulses outward, and at the same time the transmitter uses a light source to inform the receiver to start timing, and when the receiver receives the pulse, the time (T) used by the transmitter from the emission of the pulse until the receiver receives it is also calculated. There is a screw hole (M6 thread) on the side of the sensor, which can be used to fix the sensor to a suitable device.
1. Used to measure current in a circuit. 2. Features a three-range selector switch, allowing you to switch measurement ranges with a single click according to experimental requirements.
1. Used to measure voltage across circuits and electrical devices. 2. Features a three-range selector switch, allowing you to switch measurement ranges with a single click according to experimental requirements.
7F, No.1 Building, Tianan Cyber Park, No.36 Yongfeng Road, Qinhuai District, Nanjing, China. (R&D centre)
No.306 Wenchang Road, Yongyang Street, Lishui Disctric, Nanjing, China. (Manufacturing base)
©COPYRIGHT 2023 Jiangsu SWR Science & Technology Co.,Ltd. ALL RIGHTS RESERVED | SEO